Carries upto 7 sieves of 150mm or 200mm diameter. The shaker is driven by 1/4 h.p. motor through a reduction gear immersed in oil
The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination change progressively in clockwise direction. If the stop pin-below the table is removed, the shaker can have a rotary motion. In addition to this gyrator motion of the table, there is an pair of rods and a holder are supplied. The holder can be fixed on the top of the upper cycles phase, A.C. supply. Nett weight approx. 77kgs.
Size 12" 300mm